Ramps
Ramps
Videos
for Ramps
Help Articles
for Ramps
Expert Answers
for Ramps
The Dexter BrakeRite Electric Over Hydraulic Actuator #DX82KR will need the adapter installed to be compatible with your 2007 Ford F-250 brake controller. The correct adapter is the Adapter Module for BrakeRite Electric Over Hydraulic Actuator…
view full answer...The shock absorption from the Gen-Y Torsion 2-Ball Mount #325-GH-1324 will help cushion abuse on your trailer tongue and the tow vehicle. However, you need to make sure you have enough tongue weight for this to be effective. The optimal ride tongue…
view full answer...Hey Eric, the Curt Multi-Fit Ball Kit w/ 4" Offset for Chevy/Ford/GMC/Nissan Underbed Gooseneck Hitch #C68ZV is not going to work with your Ram, unfortunately. This one is only going to work for select YMM (Year Make Model) Ford 250-450s,…
view full answer...The mounting bracket for the #TV34FR is actually identical to the bracket on the #TV64FR that you were looking at. The holes are 1" apart on center vertically, and 5-1/2" apart horizontally. I have attached a picture for your…
view full answer...If you are only putting brakes like the #TRU36FR on one axle, we recommend doing the front axle for a few reasons. First, the front axle technically will bear more weight than the rear. Most trailers it would be about 60% on the front axle and 40%…
view full answer...The two sizes you mentioned are pretty similar and fit many of the same 15 inch wheels. The 205/75-15 fits rim widths of 5 inch to 6-1/2 inch whereas the 225/75-15 fits widths that are 5 inch to 6 inch. The 205 is 27.1 inches tall and the 225 is…
view full answer...For your Flash E Series HD Adjustable 2-Ball Mount - 2-1/2" Hitch - 8" Drop, 8" Rise - 18K #FA42-00-2825 is a nice hitch with a lightweight design, so I understand not wanting something really heavy. My recommendation is…
view full answer...I believe you are referring to the 1" prongs on the Stallion Aluminum Car Hauler Ramp Set #288-07503 that are designed to grab onto the small gap at the end of most trailers. This not only provides a secure connection when loading/unloading,…
view full answer...The Kodiak Oil Cap #KPCAP you are looking at is a replacement cap for the Kodiak Pro Lube Kit. The oil cap you need is the Redline Oil Cap, Plug and O-Ring for Dexter 7-9K Trailer Axles #RG04-230. This will replace the oil cap on your trailer axles…
view full answer...The Aluminum Ramp Ends for 2 x 8 Boards #288-07400 doesn't have anything special that holds the ramps to a tailgate and instead relies on the length and width of the plate, as well as the downward pressure applied by the weight of what…
view full answer...The Flint Hill Goods 29" x 49" Carrier w/ 60" Ramp #FHG69ZR does come with a threaded 5/8" hitch pin as opposed to the 1/2" pin. Since it is threaded there is not a lock that fits this particular carrier; if your customer…
view full answer...To add a third brake light to a trailer is pretty simple, but does require an adapter to convert the signal. Because trailer tail light systems combine the stop lamp and turn signals for each side onto a single circuit, you will need to use a…
view full answer...